Orange5 Plus V1.35 Download: A Complete Guide
If you are looking for a reliable and powerful programmer for reading and writing various chips, you may want to check out the Orange5 Plus V1.35. This is an upgraded version of the original Orange5 programmer, which comes with more features, functions, and supported chip types. In this article, we will show you how to download, install, and use the Orange5 Plus V1.35 software, as well as answer some common questions you may have about this device.
orange5 plus v1.35 download
Download File: https://byltly.com/2vyxUv
What's New in Orange5 Plus V1.35?
The Orange5 Plus V1.35 is a clone of the OEM Orange5 programmer, but with some improvements and enhancements. Here are some of the main differences between the Orange5 Plus V1.35 and the previous versions:
The Orange5 Plus V1.35 comes with a USB dongle, which makes it easier to use, faster, and safer.
The Orange5 Plus V1.35 software version is updated to 1.35, which adds more vehicle types and chip types compared to the older versions.
The Orange5 Plus V1.35 has more functions, such as mileage programming, airbag service reset, reading Renesas chip, etc.
The Orange5 Plus V1.35 supports a wide range of chip types, including MTRK, TMS, M08V, Immo HPX 9V0, NEC V850ES/SJ3, V850ES/SG3 UART, etc. It also supports many car models, such as Audi, BMW, Chevrolet, Fiat, Ford, Honda, Hyundai, Kia, Nissan, Toyota, etc. You can download the full list of supported chip types and car models from the links below:
[orange5-plus-dash-immo-update-list.pdf](^7^)
[v1-35-orange-5-plus-airbag-car-list](^6^)
[v1-35-orange-5-Read_Write_SRS_MCU_CAN_eng](^5^)
How to Download and Install Orange5 Plus V1.35 Software?
To use the Orange5 Plus V1.35 programmer, you need to download and install the software driver on your computer first. Here are the steps to do that:
orange5 plus v1.35 software installation guide
orange5 plus v1.35 full adapter with usb dongle
orange5 plus v1.35 programmer support car list
orange5 plus v1.35 vs orange5 v1.36 comparison
orange5 plus v1.35 free download link and password
orange5 plus v1.35 update new functions and features
orange5 plus v1.35 software driver windows 10
orange5 plus v1.35 clone with original chip
orange5 plus v1.35 read and write ecu chip
orange5 plus v1.35 mileage programming tool
orange5 plus v1.35 airbag service reset device
orange5 plus v1.35 car radio code calculator
orange5 plus v1.35 immo pin code reader
orange5 plus v1.35 motorbike mileage correction
orange5 plus v1.35 mtrk license activation
orange5 plus v1.35 tms adapter for sale
orange5 plus v1.35 m08v adapter price
orange5 plus v1.35 hpx 9v0 adapter review
orange5 plus v1.35 nec adapter how to use
orange5 plus v1.35 uart adapter manual
orange5 plus v1.35 software language options
orange5 plus v1.35 hardware test and self-test
orange5 plus v1.35 system info and license info
orange5 plus v1.35 text mode and hex mode
orange5 plus v1.35 creating a list of commands
orange5 plus v1.35 fine-tuning the exchange rate
orange5 plus v1.35 saving files and settings
orange5 plus v1.35 file transfer via serial port
orange5 plus v1.35 delay settings for bytes and blocks
orange5 plus v1.35 echo mode and loop mode
orange5 plus v1.35 management of dtr, rts chains
orange5 plus v1.35 visualising dsr, cts, cd, ri signals
orange5 plus v1.35 emulation mode for original hardware
orange5 plus v1.35 user manual and tutorial pdf
orange5 plus v1.35 customer feedback and reviews
orange5 plus v1.35 technical support and service
orange5 plus v1.35 best price and discount coupon
orange5 plus v1.35 shipping method and delivery time
orange5 plus v1.35 warranty and return policy
orange5 plus v1.35 official website and blog link
Download the Orange5 Plus V1.35 software from this link: [ The password is pmyy6g.
Copy and paste the Orange5_1.35 folder from the downloaded file to your C drive.
Connect the Orange5 Plus programmer with your computer via USB cable.
Go to Device Manager->Other Devices->Orange5 USB, right click to Update Driver Software.
Search automatically for updated driver software.
Save driver software to C://Orange5_1.35/Driver and press Next.
Choose Install this driver software anyway.
Insert the USB dongle into your computer.
Windows will notify you that it has successfully updated driver software.
Now your software is ready to use. You can run the English_orange software in C://Orange5_1.35 folder.
How to Test the Hardware and Software?
To make To make sure that your hardware and software are working properly, you can do a simple test by reading and writing a chip. Here are the steps to do that:
Select the chip type you want to test from the software interface.
Connect the chip to the Orange5 Plus programmer via the adapter or the clip.
Click on Read button to read the chip data and save it to a file.
Click on Write button to write the chip data back to the chip.
Verify that the chip data is written correctly by reading it again.
If you can read and write the chip successfully, it means that your hardware and software are working fine. You can also test other functions, such as mileage programming, airbag service reset, etc., by following the instructions in the software.
How to Use Orange5 Plus V1.35 Programmer?
The Orange5 Plus V1.35 programmer is a versatile tool that can perform various operations on different chips. Here are some of the basic and advanced operations you can do with this device:
Basic Operations: Read and Write Chips
The most common operation you can do with the Orange5 Plus V1.35 programmer is to read and write chips. This is useful for backup, clone, repair, or modify chip data. Here are the steps to do that:
Select the chip type you want to read or write from the software interface.
Connect the chip to the Orange5 Plus programmer via the adapter or the clip.
Click on Read button to read the chip data and save it to a file.
If you want to write a new file to the chip, click on Open button to load the file you want to write.
Click on Write button to write the file to the chip.
Verify that the file is written correctly by reading it again.
Advanced Operations: Mileage Programming, Airbag Service Reset, etc.
The Orange5 Plus V1.35 programmer can also perform some advanced operations, such as mileage programming, airbag service reset, reading Renesas chip, etc. These operations require more skills and knowledge, so you should be careful when doing them. Here are some examples of how to do these operations:
Mileage Programming
Mileage programming is a process of changing the mileage value stored in a chip. This can be done for various reasons, such as repairing a faulty odometer, adjusting a mismatched mileage, or modifying a mileage for personal use. Here are the steps to do mileage programming with Orange5 Plus V1.35:
Select the car model and chip type you want to program from the software interface.
Connect the chip to the Orange5 Plus programmer via the adapter or the clip.
Click on Read button to read the chip data and save it to a file.
Open the file with a hex editor or a mileage calculator software.
Find and modify the mileage value according to your needs.
Save the modified file and load it back to the software interface.
Click on Write button to write the file back to the chip.
Verify that the mileage value is changed correctly by reading it again or checking it on your car dashboard.
Airbag Service Reset
Airbag service reset is a process of clearing or resetting Airbag service reset is a process of clearing or resetting the crash data stored in a chip after an airbag deployment. This can be done to restore the normal function of the airbag system and turn off the airbag warning light. Here are the steps to do airbag service reset with Orange5 Plus V1.35:
Select the car model and chip type you want to reset from the software interface.
Connect the chip to the Orange5 Plus programmer via the adapter or the clip.
Click on Read button to read the chip data and save it to a file.
Open the file with a hex editor or an airbag service software.
Find and clear or reset the crash data according to your needs.
Save the modified file and load it back to the software interface.
Click on Write button to write the file back to the chip.
Verify that the crash data is cleared or reset correctly by reading it again or checking it on your car dashboard.
Reading Renesas Chip
Renesas chip is a type of microcontroller that is widely used in various car modules, such as engine control unit, transmission control unit, body control module, etc. Reading Renesas chip can be useful for diagnosis, repair, or modification of these modules. Here are the steps to read Renesas chip with Orange5 Plus V1.35:
Select the Renesas chip type you want to read from the software interface.
Connect the chip to the Orange5 Plus programmer via the adapter or the clip.
Click on Read button to read the chip data and save it to a file.
You can open the file with a hex editor or a Renesas software to view or edit the data.
Conclusion
The Orange5 Plus V1.35 is a powerful and versatile programmer that can read and write various chips for different purposes. It has many advantages over the previous versions, such as more features, functions, and supported chip types. It also comes with a USB dongle, which makes it easier to use, faster, and safer. If you are looking for a reliable and professional programmer for your car projects, you should consider getting the Orange5 Plus V1.35. You can download and install the software from the link we provided above, and follow our guide on how to use it. We hope you find this article helpful and informative. If you have any questions or feedback, please feel free to contact us.
FAQs
Here are some of the frequently asked questions about Orange5 Plus V1.35:
Q: What are the system requirements for Orange5 Plus V1.35 software?
A: The Orange5 Plus V1.35 software can run on Windows XP, Windows 7, Windows 8, and Windows 10 operating systems. It requires at least 512 MB of RAM and 1 GB of free disk space.
Q: What are the accessories included in Orange5 Plus V1.35 package?
A: The Orange5 Plus V1.35 package includes:
The Orange5 Plus programmer device
The USB dongle
The USB cable
The power adapter
The CD with software and drivers
The adapters for different chip types
The clips for different chip types
Q: How can I update my Orange5 Plus V1.35 software?
A: The Orange5 Plus V1.35 software can be updated online by clicking on Update button in the software interface. You need to have an internet connection and insert your USB dongle before updating.
Q: How can I get technical support for my Orange5 Plus V1.35 programmer?
A: You can get technical support for your Orange5 Plus V1.35 programmer by contacting us via email, phone, or online chat. We will try our best to help you solve any problems you may encounter with your device.
Q: How can I buy an Orange5 Plus V1.35 programmer?
A: You can buy an Orange5 Plus V1.35 programmer from our official website or our authorized dealers. We offer competitive prices, fast delivery, and quality service for our customers. 44f88ac181
Comments